Apparel

The Naughtvind winter cycling jacket shrouds you in supreme comfort on cold rides. High-tech fabrics manage temperature and moisture while they stretch with you. Smart features such as vents, pockets, and reflective accents make every ride easier and safer. We designed this cycling jacket to work perfectly with the rest of our Naughtvind line for the ultimate winter riding system. Face winter head-on with the Naughtvind Jacket. - Bike-focused design with longer drape in back - Asymmetrical zipper to prevent chin rub - Made from 89% recycled materials - Water- and wind-resistant shell material with stretch for riding comfort - Side-body ventilation for temperature management - Zippered and open rear pockets to conveniently stash ride essentials - Reflective accents on arms and rear pockets for safety - Available in "Women’s" (more fitted) and "Men’s" (straighter) cuts

Originating from the conceptual standpoint of a mountaineering boot, the new and evolved Wölvhammer is lighter, more comfortable, and grippier. The overhauled design features a removable synthetic liner and a three-piece proprietary bottom assembly compatible with flat and clipless pedals. When the cold winter creeps in, Wölvhammer has you covered. - Removable synthetic liner boot for quick drying - 3-piece proprietary bottom assembly is lighter, warmer offers more walking traction - Aerogel insulation blocks cold cleats and allows use of preferred insoles without sacrificing warmth - 0 to 25F / -18 to -4C Comfort

Most winter boots aren't made for riding bikes — they're too warm in some spots or not warm enough in others, and they're not optimized for pedaling. Wölvhammer BOA® boots are the answer for winter riders. Designed and built for the rigors of real winter riding (deep snow, slippery ice, cold pedals), These winter bike boots are rated for comfort from 0º to 25ºF (-18º to -4ºC), slotting between our Ragnarök and Wølfgar boots. Take on winter rides with Wölvhammer. - Rated for 0º to 25º F / -18º to -4º C comfort - The BOA® Fit System delivers micro-adjustable, precision fit engineered to perform in the toughest conditions - Hook-and-loop upper strap helps secure boot - Removable synthetic liner boot for quick drying - Waterproof breathable membrane to manage moisture - 200 g of Primaloft® insulation - Aerogel insulation underfoot blocks the chill from snow, ice, and cold pedals, and allows for insoles without sacrificing warmth - Non-slip sole for walking on icy surfaces - Compatible with flat and clipless pedals NOTE: The webbing loop on the back of the original liner boot was not stitched properly and will come loose if pulled with too much force. All Wölvhammer BOA shipments will now include free updated liner boots with the loop sewn directly to the vertical seam on the back of the liner for a much stronger connection.

Step into Wølfgar, the world’s most advanced winter cycling boot. We’ve combined decades of winter cycling experience with NASA-grade insulation materials for a boot that keeps feet warm and dry down to -25ºF. Wølfgar is a boot worthy of singletrack sessions or multi-day expeditions in the harshest winter weather. - Our lightweight three-piece proprietary bottom assembly is compatible with both flat pedals and 2-bolt cleats, and features a rubber outsole with microglass lugs for traction on ice - Waterproof materials and construction keep the elements out, while aerogel under the foot and over the toe block frigid air - On the inside, Wølfgar’s reflective thermal lining retains warmth, and a removable wool and faux-fur liner wicks moisture and insulates

Super Light Minimalist design keeps weight low and a slim profile means the Transition elbow pads can easily go unnoticed under a jersey. Internal silicone strips combined with a compression fit mean the pads form closely around the upper and forearm giving a consistent non-slip fit. Breathable The breathable 4-way stretch mesh runs the full length on the inside of the pads keeping free from moisture build-up. - High length compression design to prevent pad from slipping - Silicone printed gripper on inside of cuffs - Mesh back for increased airflow - Tested beyond CE EN 1621-1:2012 Level 2 - Pre-curved fit for ultimate comfort - S: S: 8''-10'' (20-25cm), M: 10''-12'' (25-30cm), L: 12''-14'' (30-35cm), XL: 14''-16'' (35-40cm) - Take measurement from the widest part of the bicep - Weight 245g (size L)

Our super-light Youth Transition pads are designed for younger riders looking for lightweight protection that can be worn all day long. The Transition pads mould with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin.

The Flex elbow/youth knee pads are for any rider needing complete coverage with confidence-inspiring protection. Constructed in the same way our adult Flex Knee pads with an open back and dual-layer protection the Flex has you covered.

Designed with valuable feedback from the legend himself, the Sam Hill Lite signature elbow pad builds off of our popular Transition elbow pad to be the ultimate ultra-lightweight elbow pad for all types of riding or racing. Light enough to be worn all day long. The Sam Hill Lite elbow pads mold with body heat to provide maximum comfort with a breathable sleeve to wick moisture away from the skin. CE Certified Level 1. Compression square line Ripstop Spandex fabric allows for a durable lightweight feel along with great airflow. - Rollable and stash-able using the elastic loop - Durable elbow cap fabric for increased durability and protection - Compression square line Ripstop spandex allows for a durable lightweight feel - Long bicep length fit for no slippage and all-day comfort - Articulated cut for the perfect fit - Silicone top and bottom elastic gripper - Certified CE/ EN 1621/1 Level 1 - Weight 105G pair (size XL)

Without compromising on safety and surpassing the relevant CE test the Transition pads offer comfortable protection in a super-light package. At 262g per side in Medium they are a true fit-and-forget piece of kit. - Low profile, minimal protection at its best - Compression fit kneepad with high-strength, flexible 1mm cap for superior fit and movement - Poly/Spandex and 4 way stretch mesh that is rollable and stowable enough to fit in a jersey pocket - Designed beyond CE EN 1621/1 Standards

Designed with valuable feedback from the legend himself, the new Sam Hill Lite signature knee pad is designed to be the ultimate ultra-lightweight knee pad for trail riding and the racer seeking super light protection. The Sam Hill Lite knee pads mould with body heat to provide maximum comfort with a breathable sleeve to wick moisture away from the skin. Unlike many minimalist pads, the Sam Hill Lites pass CE EN1621-1:2012. - Rollable and stash-able using the elastic loop - Durable knee cap fabric for increased durability and protection - Compression square line Ripstop spandex allows for a durable lightweight feel - Long thigh-length fit for no slippage and all-day comfort - Silicone top and bottom cuff elastic gripper - Silicone logo print to assist in gripping short liner cuff - Certified CE en1621-1:2012 level 1 - Weight 205G pair (size XL)

Flex Knee pads are for riders looking for soft pad comfort with the protection of a hard shell. Abrasion-resistant material covers the front and sides to give a full-on protection package. - Double layer custom foam for increased airflow and reduced weight - Upper calf muscle support to prevent pad from slipping - Center adjustment strap provides even tension above calf muscle and around top of pad - Custom idp polygon neoprene for superior protection and ventilation - Designed beyond CE EN 1621/1 Standards

Designed with valuable feedback from the 3-time EWS winner himself, the Sam Hill signature knee pads are the ultimate MTB knee pads for gravity riding, whatever your discipline. Light enough to be worn all day long, the Sam Hill knee pads mould with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin. CE EN1621-1:2012 Level 2. - High length compression design to prevent pad from slipping - Extra padding surrounding main knee cap for increased protection and support - Silicone printed gripper on inside of cuffs - Silicone printed logo on top and bottom outside cuffs to grip silicone on to shorts - Mesh back for increased airflow - Certified CE EN 1621-1:2012 Level 2 - Pre-curved fit for ultimate comfort - Weight 340g (size L)

As bikes become more capable and trail riding gets faster the M2 slots into the current generation of open face protection. Conehead technology utilises dual-density foam to dissipate impacts more effectively giving you a safer ride. The Boa Fit System delivers a connected, fast, customized and durable fit, purpose-built for performance. - 19 vents provide cool air intake and heat exhaust - Conehead technology - Full rear head coverage - Custom 7iDP liner for superior fit and comfort - BOA one hand dial fit adjustment - Rapid adjust chin strap - Tested beyond CE, CPSC, AS standards The M2's foam liner is made of two density layers. The outer layer, which is the black part, is made of high-density foam and has cones facing inwards. The inner layer, the grey part which is close to the head, is made of softer low-density foam and has cones facing outwards.

7iDP Transition Knee Shin Pads EXTRA PROTECTION Without compromising mobility the Transition Knee Shin pads offer an extra 5 inches of shin protection in a super-light package. Along with the side knee protection you'll be ready for any trail. COMPRESSION FIT Designed to keep weight down the compression fit, the slip-on design fits higher on the thigh than most pads. An internal silicone strip keeps the pads from slipping down. BREATHABLE SOCK Running the length of the pad in the rear and extending across the lower front a breathable 4-way stretch mesh maintains airflow for all-day comfort. - High length compression design to prevent pad from slipping - Extra shin and side knee padding for increased protection - Silicone printed gripper on inside of cuffs - Silicone printed logo on top outside cuff to grip silicone on to shorts - Mesh back for increased airflow - Certified CE EN 1621-1:2012 Level 2 - Pre-curved fit for ultimate comfort - Weight 340 grams (Size L)

Our most innovative knee pad to date, the project knee is super light, breathable and offers top-level protection. The unique knitted design and CE approved protection gives riders outstanding comfort and confidence. CE Certified Level 2. - Center Strap System allows for even adjustment - Flexible front knee cap increasing durability and protection - Proknit fabric to control elasticity - Thigh-length Proknit main body to prevent pad slipping - Articulated cut for the perfect fit - Silicone top and bottom elastic gripper - Silicone logo print to assist in gripping liner undershorts silicone tape - Certified CE EN 1621-1:2012 Level 2 - Extra protection around the outside of the knee - Weight 430g pair (size XL)

- Lightweight fiberglass shell - 23 Large freeflow vents with internal channels for maximum cooling. - Energy absorbsion and slip plane technology - Crash release visor system - Easy position visor, no bolts needed - Quick release liner for easy washing - Agion Bluesign approved antimicrobial treatment - Fidlock magnetic closure - Certified: CPSC Bicycle & ASTM F1952-15 (Downhill) Sizing: - Small = 55 – 56cm - Medium = 57 – 58cm - Large: 59 – 60cm - X-Large: 61 – 62cm - XX-Large: 63 – 64cm

The Scraper 3.0 is just as much at home on the bike as in the halfpipe, protecting the BMX rider as reliably as the longboard fan. And, with the optional winter kit, you can get after it in all types of weather. The intelligent ventilation system, with its many inlets and outlets, and the numerous adjustment options that adapt the Scraper 3.0 to each head in a few easy steps, ensure the greatest possible comfort. - ABS hard-shell technology - High visibility due to powerful reflectors - Ponytail compatibility: Helmet well suited to plait wearers - Forced Air Cooling Technology: Sophisticated ventilation system for an optimal head climate - Excellent ventilation with 4 air inlets and 4 air outlets - Size adjustment by means of a half-ring made from particularly hard-wearing and slightly malleable plastic for optimal stability and fit - Zoom Ace Urban: Finely adjustable fit system with a handy adjustment wheel Sizing: - Medium: 54 – 58cm - Large: 57 – 62cm

Quin Sensor for AirDrop/Moventor 2.0 MIPS/MoDrop/MoDrop MIPS

FOR OFF-ROAD ADVENTURES An ideal off-road helmet for the first rides on uneven terrain. The MoTrip promises a high level of comfort for your rides over hill and dale. The deep fit of the MTB helmet ensures the best possible protection for the head. To make off-road rides more comfortable, the MoTrip is also equipped with the MTB adjustment system. This enable both individual size adjustment and height adjustability using the adjustment wheel at the back of the head. This is a great advantage for ponytail wearers, as they can make room for a ponytail by adjusting the height. Go on off-road adventures with the lightweight and well ventilated bike helmet or alternatively wear it for commuting. - In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Adjustable strap divider - Height-adjustable visor - Ventilation: excellent ventilation through 6 air inlets and 8 air outlets

ALLL-ROUND HELMET The Macator is a sporty entry-level helmet for cyclists looking for an outstanding all-round helmet. The Macator has not only a comfortable padding but also offers an excellent ventilation, and it comes in a variety of bright, highly-visible colors. In-Mold: Lightweight, durable helmet with a long-lasting combination of EPS core and Polycarbonate shell - Bug mesh: Full protection from insects - Ponytail compatibility: Perfect fit for people with long hair - Full-ring: Adjustable ring connected to adjustment system enclosing all of the head - Excellent ventilation with 5 air inlets and 8 air outlets - Zoom Ace: Finely adjustable adjustment system with handy adjustment wheel for customizable fit

Popular among cyclists young and old, the Urban-I 3.0 is a perfectly equipped urban bike helmet with a number of practical features. Its pleasingly discreet appearance, practical functions, and refined design make the Urban-I 3.0 one of our most successful helmets. - In-Mold for a durable connection of the outer shell with shock-absorbing helmet material (EPS) - High visibility due to reflectors - Foamed-in fly net keep insects out - Ponytail compatibility: Perfect fit for people with long hair - Full-ring: Adjustable ring connected to adjustment system enclosing all of the head - Excellent ventilation with 12 air inlets and 5 air outlets - Zoom Ace Urban: Finely adjustable fit system with a handy adjustment wheel - Large, high-mounted, and integrated LED taillight with 180° visibility - Fidlock magnetic strap buckle Sizing: - Small: 51 – 55cm - Medium: 52 – 58cm - Large: 56 – 61cm - X-Large: 61 – 65cm

NTA-classified helmets such as the PURL-Y are adapted to the new requirements for riding at up to 45 km/h. The PURL-Y city helmet is also a good choice on a bike without an auxiliary motor. It combines safety with comfort. The shock-absorbing inner material is firmly bonded to the outer shell using the proven in-mould process. And to ensure that the helmet fits comfortably and securely, it can be adapted individually to different head sizes with the easy-grip and smooth-running adjustment wheel. There is enough space between the adjustment system and the lower edge of the helmet for a ponytail. - In-mould design for a durable connection with the outer shell with shock-absorbing helmet material (EPS) - Size adjustment via a full ring made of 2 plastic components for optimum stability and positive fit - Certified in accordance with NTA 8876 for e-bikes and S-pedelecs - Ponytail compatibility: the helmet is very suitable for riders with a ponytail - Removable and washable padding with maximum wearing comfort - Integrated fly net - Zoom Ace: precise adjustment system with non-slip adjustment wheel for individual fit

DEEPLY IMPRESSIVE DESIGN No adjusting, no charging – helmet on, get on your bike and go! The WingBack from our road helmet family has a minimalist design – and yet it hides some sophisticated functions under its winged design, including technologies from the performance helmets. The WingBack emphasises its sporty character with deep ventilation channels, thin struts and a separation edge at the rear. The combination of polycarbonate (PC) and polystirene (EPS) gives it a very light appearance, with a weight of just 240 g. The flutter-free FlowStraps webbing does not need a strap distributor. With Zoom Ace, the helmet can be quickly adjusted to individual head sizes and there is also room for a ponytail. So: helmet on, and a tour in the style of fixie riders can begin.

FOR MORE SAFETY The ABUS MoDrop MIPS can handle any terrain and any riding style and always leaves you wanting more. The mountain bike helmet is the best companion for big mountain days, experiences on the trail or just leisurely family outings. Equipped with our MTB-specific adjustment system and TriVider webbing distributors, this helmet offers many features that make it more comfortable to wear. The height-adjustable, visor-like visor protects you from hanging branches when riding downhill. In the event of a fall, it can also prevent direct impact with the face. Additional safety is provided by the MIPS impact protection. This is intended to protect the brain, especially if the cyclist's head hits the ground at an angle during a fall. In a fall, the brain is exposed to strong rotational movements that can lead to severe brain injuries. With MIPS, a movable low-friction plastic shell is integrated into the helmet to ensure that rotation is reduced and the head is better protected. - Multi-Shell In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Laterally adjustable, non-slip TriVider webbing distributor - Molded lower shell for added durability - QUIN ready—easy upgrade with the separately available QUIN chip for fall detection - GoggFit: Device that allows a pair of goggles to be fixed to the helmet when the athlete doesn't need them while riding - MIPS: Impact protection that protects the brain, especially when the cyclist's head hits the ground at an angle during a fall. - Ventilation: excellent ventilation for this helmet type due to 6 air inlets and 8 air outlets - Bug mesh: thorough protection against insects

THE BEST OF BOTH WORLDS The Hyban 2.0 combines a particularly robust hard shell with a huge air intakes. In combination with the integrated, bright LED rear light, the Hyban 2.0 is the perfect everyday helmet for the city. - ABS hard shell: Robust helmet made of EPS foam and injection molded outer shell - High visibility: High visibility thanks to powerful integrated LEDs - Bug mesh: Full protection from insects - Ponytail compatibility: Perfect fit for people with long hair - Full-ring: Adjustable ring connected to adjustment system enclosing all of the head - Excellent ventilation with 5 air inlets and 8 air outlets - Zoom Ace Urban: Finely adjustable adjustment system with handy adjustment wheel for customisable fit - Large, highly mounted and integrated LED tail light with 180° visibility

The Pedelec 2.0 offers an uncompromising combination of comfort and protection. Complemented by clever features, it is the ideal companion when cycling in road traffic. - In-Mold for a durable connection with the outer shell with shock-absorbing helmet material (EPS) - Forced Air Cooling Technology ventilation system keeps you cool and comfortable with 4 air inlets and 9 air outlets connected with flow channels - Zoom Ace Urban adjustment system with handy adjustment wheel for a customizable fit - Size adjustment by means of a half-ring made from particularly hard-wearing and slightly malleable plastic for optimal stability and fit - High visibility due to powerful reflectors and an integrated LED taillight with 180-degree visibility - Foamed-in fly nets keep insects out - Lower edge protection provides the helmet with additional protection from external influences - Fidlock magnetic strap buckle - Ponytail-compatible and well suited for braided hairstyles Sizing: - Medium: 52 – 57cm - Large: 56 – 62cm

FOR EVERY ADVENTURE The "Made in Italy" ABUS helmet family is growing. The PowerDome MIPS comes from the same ABUS-owned Italian production facility where our other top road helmets are produced. The most striking feature of the PowerDome MIPS is its weight, coming in at 260g for a size medium. Fit is easily dialed in with the Zoom Ace adjustment system, and the 10 air inlets and 7 air outlets ensure you keep cool when climbing a mountain pass or riding open gravel roads on the hottest of days. The sophisticated ventilation is also supplemented by a sleek air scoop on the helmet: modeled after the PowerDome of high-performance cars. On a gravel adventure, fighting against the wind or a casual ride with friends, the PowerDome MIPS brings the Italian lifestyle to every ride. This keeps the focus on having fun on two wheels. No rules, no dress code, no pressure to perform. With this helmet, the journey becomes the destination!

SAFETY ON STEEP TRAILS Steep climbs, high-speed racing, all-day adventures: "Down-country" is action-packed, which means the demands on equipment also increase. Down-country is all about going up fast, down fast and repeating. The Moventor 2.0 MIPS is virtually perfectly for the demands of mountain bikers. The MTB helmet is lightweight, well ventilated and has a deeper fit that gives more protection at the back of the head. When the trail points downwards, the ten air inlets and nine air outlets provide good ventilation. In addition to all the well thought-out features for off-road use, the MIPS model has impact protection. This is intended to protect the brain, especially if the cyclist's head hits the ground at an angle during a fall. In a fall, the brain is exposed to strong rotational movements that can lead to severe brain injuries. With MIPS, a movable low-friction plastic shell is integrated into the helmet to ensure that rotation is reduced and the head is better protected. - Multi-Shell In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Laterally adjustable, non-slip TriVider strap system - Moulded lower shell for added durability - QUIN ready—easy upgrade with the separately available QUIN chip for fall detection - MIPS: Impact protection that protects the brain, especially when the cyclist's head hits the ground at an angle during a fall. - GoggFit: Device that allows a pair of goggles to be fixed to the helmet when the athlete doesn't need them while riding - Ventilation: excellent ventilation through 10 air inlets and 9 air outlets

FOR DEMANDING TRAILS The CliffHanger is the flagship trail model in the ABUS MTB series. When you're riding up and down steep hills on an enduro bike, the MTB helmet offers reliable protection. Lighter, better ventilated and with an adjustable TriVider webbing spreader—the CliffHanger scores with these features. The special MTB adjustment system also ensures that the helmet sits comfortably and firmly on the head when rattling through the wildest of rock gardens. The inner shell made of EPS hard foam is foamed into a three-part outer shell, making a lightweight and sturdy helmet. The existing Multi-directional Impact Protection System (MIPS) can reduce energy by up to 40 percent in the event of an oblique impact. With the CliffHanger, we have succeeded in developing a helmet that offers virtually perfect conditions for high speeds and demanding trails. - Multi-Shell In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Laterally adjustable, non-slip TriVider strap system - QUIN ready—easy upgrade with the separately available QUIN chip for fall detection - MIPS: Impact protection that protects the brain, especially when the cyclist's head hits the ground at an angle during a fall. - ActiCage: Structural reinforcement integrated in the EPS to optimise stability - Moulded lower shell for added durability - Height-adjustable visor - GoggFit: Device that allows a pair of goggles to be fixed to the helmet when the athlete doesn't need them while riding - Ventilation: excellent ventilation through 8 air inlets and 6 air outlets - FidLock magnetic buckle

A HELMET MADE FOR THE CITY STREETS The Pedelec 2.0 is an uncompromising combination of protection and comfort. Complemented by clever features, it is the ideal companion in road traffic. In big city traffic, a helmet is an indispensable companion for you as a cyclist. Accidents happen quickly and if you fall, a bicycle helmet protects you against serious injury. With the Pedelec 2.0, ABUS offers a bicycle helmet that meets the high safety requirements of the big city. Its deep temple area provides the required additional protection. The Pedelec 2.0 is also characterised by the integrated rain hood, which can be quickly pulled over the helmet at the first sign of rain. The especially bright, rechargeable light and the replaceable visor offer additional, passive protection. - This NTA 8776 helmet is a helmet that complies with the requirements in the Dutch Technical Agreement (NTA) 8776. - In-Mold for a durable connection with the outer shell with shock-absorbing helmet material (EPS) - High visibility due to powerful reflectors - Large, highly mounted and integrated LED tail light with 180° visibility - Forced Air Cooling Technology: Sophisticated ventilation system for an optimal head climate - Excellent ventilation with 4 air inlets and 9 air outlets connected with flow channels - Ponytail compatibility: Helmet well suited to plait wearers - Zoom Ace Urban: Finely adjustable adjustment system with handy adjustment wheel for customisable fit - Size adjustment by means of a half ring made from particularly hard-wearing and slightly malleable plastic for optimal stability and form fitting - Foamed-in fly nets - Lower edge protection: Provides the helmet with additional protection from external influences - Fidlock magnetic strap buckle - Rain cover integrated in the helmet

The GameChanger sets new standards. What is a cyclist's biggest enemy? Air resistance. Every cyclist knows that battling against the wind is one of the toughest challenges they face. With its Multi Position Design, the GameChanger redefines aerodynamics. The special shape reduces air resistance by minimizing exposed surfaces regardless of weather conditions, head-tilt position, and inflow angle. Our innovative Forced Air Cooling Technology sucks in incoming air and channels airflow around the head, creating a perfect climate and keeping your head cool, even in hot races. - Multi Position Design: For optimal aerodynamics regardless of head tilt - Forced Air Cooling Technology: Sophisticated ventilation system for an optimal head climate - FlowStraps: Aerodynamic, flutter-free, and skin-friendly thanks to specially developed strap profile - Zoom Ace: Finely adjustable adjustment system with handy adjustment wheel for customizable fit - AirPort: Aerodynamic glasses holder with strap guide - Multi Shell In Mold: For safe shock absorption - Ponytail compatibility: Helmet well suited to plait wearers Sizing: - Small: 51 – 55cm - Medium: 52 – 58cm - Large: 59 – 62cm

AERODYNAMICS REDEFINED The GameChanger sets new standards. What is a cyclist's biggest enemy? Air resistance. Every cyclist knows that battling against the wind is one of the toughest challenges they face. With its Multi Position Design, the GameChanger redefines aerodynamics. The special shape reduces windage by minimizing exposed surfaces, regardless of weather conditions, head-tilt position and inflow angle. Our innovative Forced Air Cooling Technology sucks in incoming air and channels airflow around the head, creating a perfect climate and keeping your head cool even in hot races. - Multi Position Design: For optimal aerodynamics regardless of head tilt - Forced Air Cooling Technology: Sophisticated ventilation system for an optimal head climate - FlowStraps: Aerodynamic, flutter-free and skin-friendly thanks to specially developed strap profile - Zoom Ace: Finely adjustable adjustment system with handy adjustment wheel for customizable fit - AirPort: Aerodynamic glasses holder with strap guide - Multi Shell In Mold: For safe shock absorption - Ponytail compatibility: Helmet well suited to plait wearers

PROTECTED ALL AROUND With the AirDrop, ABUS offers its first full-face helmet that provides the best protection even for your most daring jumps. Enduro racers, downhillers, E-MTB riders and alpine adventurers are always pushing the limits of mountain biking. Increased protection used to mean heavy, hot and claustrophobic full-face helmets. The ABUS AirDrop, by contrast, features ASTM-certified DH safety levels with exceptional ventilation and trail-friendly weight. New technologies like our EVA collarbone protector inserts, breakaway visor attachments and side communication channels bring real benefits to bike parks and the backcountry. If gravity is the thrill you need, the AirDrop is the MTB helmet for you. - In-mould manufacturing for a durable connection to the outer shell with shock-absorbing helmet material (EPS) - Zoom Ace FF: Adjustment system to fit the head circumference - Collarbone protection edges - QUIN ready—easy upgrade with the separately available QUIN chip - Breakaway visor bolts - ASC—ABUS communication channels increase spatial awareness - Breathable cheek pad inserts - Design suitable for spectacles - Double D-ring buckle system - Ventilation: excellent ventilation through 11 air inlets and 6 air outlets

Make sure you have the decisive edge in the battle for every watt: take your racing experience to the next level with the GameChanger 2.0 MIPS. Because every second counts, less air resistance is a must! This is where the wider rear comes into play, in addition to the aerodynamic shape. The AeroBlade optimises the airflow with a special grid structure and adapts to different speeds, side angles and helmet inclinations. So the GameChanger 2.0 has a solution for every racing situation. Even on the hottest rides, you can keep a cool head thanks to the AirBoost air inlet and sophisticated ventilation system. But so that comfort doesn’t fall by the wayside, you can conveniently adapt the helmet fit using our patented adjustment system. ActiCage increases the stability of the road helmet. In the MIPS variant, the Air Node Rotation System softens the rotational forces in the event of a fall and offers greater protection for the brain. Faster forward with the GameChanger 2.0: tested by professional athletes in the wind tunnel and on the road. Time to get going!

Pull these 8” All-City Parthenon Party Socks all the way up and step on out. Bold color and cotton comfort makes ‘em an easy choice for everyday wear or pushing the pace on your next group ride. - Premium cotton with stretch mesh ventilation - Fully cushioned foot and smooth toe seam - Arch compression to prevent bunching and slipping - SM/MD or LG/XL

Look sharp and feel at ease on the bike or off with this classic All-City Tee done up in deep maroon and gray. Made of combed and ring-spun cotton with side seams and shoulder taping so you can feel put together even if you’re draggin’ your feet.

Every time Axl Rose hits a high note, a pink-eyed jungle cat gets its fangs. You can get the All-City Night Claw T-Shirt at your local AC dealer. Made of cotton so you can stay comfortable and alert while welcoming folks to the jungle. - Side seamed, taped shoulders - Part of an artist collaboration with Minneapolis Illustrator and Designer Emma Eubanks

You’ll dance the night away in cotton crewneck comfort with our party-forward Club Tropic T-Shirt. Tell that deejay to drop the needle and fire up the mirror ball. - 100% combed ring-spun cotton - Women’s sizes Small–2XL - Longer body length with side seams - Tear-away label and comfortable baby rib collar

Featuring a kaleidoscopic cycling scene on soft comfortable cotton, wild color and shape collide on the retro-flavored All-City Parthenon Party T-Shirt. Show some pride for what you ride, on the bike or wherever. - Cotton - Women's sizes SM-2XL

Positive vibes only with the All-City Week-Endo Women’s T-Shirt. Easy-breathing cotton construction means dependable comfort on the couch or wherever your day takes ya.

The Wangaaa! kit hits all the right style notes, it’s reminiscent of early 90’s skateboarding, punk, and pro-wrestling. We think that it’s without a doubt the coolest kit All-City's turned out yet. The Wangaa! jersey is sourced from their friends in Colorado at Pactimo, and utilizes their Quatro-Lite fabric in the body for its ultra-soft, CoolDry, lightweight properties, and a Zero-weight, breathable, stretch mesh in the side panels to provide flexibility and reduce body heat. While we expect this kit to be worn all year, you will find that it especially excels in keeping you comfortable when it turns hot and muggy.

Lightweight and breathable with an aerodynamic fit, the All-City Classic Logowear Jersey brings extreme comfort and style to hot summer rides and the most brutal climbs. Featuring a full-length one-handed zipper and three full-size structured pockets in the rear for all your favorite snacks, it pairs up pretty dang nice with our Perennial Bibs. Fact, not opinion. - Reflective trim - Zero-weight mesh back panel and ultra-soft silicone waist gripper in rear - Full-length semi-auto lock YKK zipper with rubber pull-tab - Tapered collar with anti-chafe neck tape - Men’s sizes SM-2XL, Women’s sizes SM-XL

Lightweight and breathable with an aerodynamic fit, the All-City Night Claw Jersey brings serious nocturnal energy and extreme comfort to hot summer rides and the most brutal climbs. Steal jealous glances, stay cool with the full-length one-handed zipper, and keep your snacks nearby with three full-size structured pockets in the rear. Snacks are the best. - Reflective trim - Zero-weight mesh back panel and ultra-soft silicone waist gripper in rear - Full-length semi-auto lock YKK zipper with rubber pull-tab - Tapered collar with anti-chafe neck tape - Designed exclusively for All-City by Minneapolis Illustrator and Designer Emma Eubanks

Built to last and go real fast, the All-City Night Claw Bib Shorts feature breathable stretch mesh uppers, a soft and well-ventilated chamois, and excellent moisture-wicking abilities to keep ya feeling fresh and comfortable during all-out efforts and all-day rides with friends. The stealth-mode style is just a bonus. - Contoured seaming for an exceptional fit - Designed exclusively for All-City by Minneapolis Illustrator and Designer Emma Eubanks

Designed for big efforts and podium finishes, All-City’s aerodynamic Classic Jersey 4.0 comes in badass black with clean, high-contrast white lettering. Featuring short sleeves and three cargo pockets in back, grab All-City’s Perennial Cargo Bibs to complete the kit. - Breathable and moisture-wicking synthetic fabric - Full-length YKK zipper and collar - Silicone waist gripper and stretchy flatlock stitching - Men’s sizes SM–3XL - Made in Wisconsin, USA

Designed for big efforts and podium finishes, All-City’s aerodynamic Classic Jersey 4.0 comes in badass black with clean, high-contrast white lettering. Featuring short sleeves and three cargo pockets in back, grab All-City’s Perennial Cargo Bibs to complete the kit. - Breathable and moisture-wicking synthetic fabric - Full-length YKK zipper and collar - Silicone waist gripper and stretchy flatlock stitching - Women’s sizes SM–3XL - Made in Wisconsin, USA

A neoprene pogie designed to allow riders to change positions from hoods to drops without removing hands from the mitts. Internal or external cable routing options. - Water-proof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars and can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands

A neoprene pogie designed to work with flat or riser style handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Vent zipper can be opened if hands start to overheat - Measures 10" wide by shifters/brakes

A neoprene pogie designed to fit on handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands

A neoprene pogie designed to fit on handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands

A neoprene pogie designed to work with drop handlebars fitted with integrated shift/brake levers with externally routed shift cables and housing. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Opening measures 8.5" across

Extreme Cold Mitts for Shimano/SRAM/Campy levers that have internally routed cables. Our XL size is specifically designed for Hydraulic Disc Brake Levers, customers with XL glove size, or you need to wear a heavier glove due to circulation issues. - Waterproof, 6mm thick neoprene with Fleece lining on the inside, and nylon lamination on the outside - Removable velcro cuff for easy access & removal of hands with no draw string complications - Neoprene has a closed cell construction that features closed air bubbles that serve as insulators - Allows one to use thinner gloves versus heavy gloves that get wet due to overheating - Thinner gloves provide better dexterity, so braking and shifting are easily accomplished - Those who suffer from Raynaud's or numb/cold hands can be comfortable and warm - Mitts are easily installed or removed for temperature changes - Zipper can be opened for ventilation for temperature regulation - Black, pair

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - Measures 11" wide by shifters/brakes

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts and is designed to work with drop bar style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - Opening measures 9" across

Bellwether's Headband is cut from their Thermo-Dry fabric that traps body heat in the soft interior while directing moisture out for total comfort and temperature control. It keeps your ears warm and slips under your helmet with ease.

Mom would be pleased to know you still put a hat on when it's cold. Bellwether's Skull Cap is the perfect way to cover your head on the bike. Its stretchy Thermo-Dry fabric traps body heat in the soft interior while directing moisture out for total comfort and temperature control. And of course it fits smoothly under your helmet.

Bellwether's Balaclava is the official partner of the dedicated, "no off-season" rider. Its stretchy Thermo-Dry fabric traps body heat in the soft interior while directing moisture out for total comfort and temperature control. No need to worry about exposed skin either thanks to the long, contoured cut that provides extra neck coverage. And of course it fits smoothly under your helmet.

Ventilated, shock-absorbing glove design offering great control and optimal bar feel. Features: - High-density gel padding relieves pressure points - Silicone-printed palm patches improve grip - Tech-mesh moisture wicking fabric - Ventilated 4-way stretch Lycra - Adjustable closure at wrist - Flexion points on braking fingers - Microfiber thumb to wipe perspiration - Hook and Loop closure

To keep warm and healthy, be sure to slip on Bellwether's Coldfront Cap before heading out the door. It combines a wind-blocking front with brushed fleece rear panels to keep your noggin warm and toasty on even the most blustery days. Plus, its thermal fleece interior helps trap heat while allowing moisture to escape for total comfort. And, it fits smoothly under your helmet.