Components

The Pressure is simply a refinement of our ever popular Contact pedal. The Pressure has a longer body than the Contact, but retains the smallest Q-Factor in the fleet. This makes it ideal for DJ and freeride, but many riders do like to use them for DH and trail riding too.

Our floating discs have been redesigned with a wider braking surface to enable them to be used as a replacement on many other braking systems in addition to our own FEATURES - Constructed in two parts, aluminium centre and stainless steel braking surface. - High performance disc, allowing the stainless steel outer to expand separately from the centre and handle high temperatures without warping. - Hope floating rotors have a true floating design which allows 1 degree of freedom. This means the outer is always free to expand when subjected to heat. - Lightweight design. - Aluminium centre acts as heat sink keeping disc temperatures lower. - CNC machined centre is stiff and lightweight so has the advantages of a thicker fixed disc without the weight penalty.

Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all of our experience into a product to meet and exceed the demands of current and future bike technology. KEY FEATURES - Sealed stainless Steel cartridge bearings - Hub shell machined from forged aluminium billet - Standard 6 bolt disc fitting - Larger spoke flange to enable stiffer wheel builds - Unsurpassed reliability - Available in both standard 15mm, 20mm and Torq end cap options - Hub flanges are moved outboard 5mm compared to the standard 100m front hub to increase wheel stiffness - Available Black, Silver, Bronze, Red, Blue, Purple and Orange - Available in 24, 28, 32 and 36 hole drillings - Machined from forged 2014 T6 Aluminium billet - Conversions available for 15mm Boost, 20mm Boost and Torq **Note**Boost 110mm front hub uses a different, wider hub body compared to the standard 100mm front hub

Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all of our experience into a product to meet and exceed the demands of current and future bike technology. KEY FEATURES - Improved sealing to stop dirt ingress and to reduce drag - New Labyrinth seal has zero drag for incredible freewheeling performance - New Pawls/Springs design to increase longevity, load capacity & a reduction of drag. - Increased engagement from 44 to 108 with a new offset 6 pawl freehub design - Wire cut pawls from high strength steel for maximum strength. - New step down axle design for a stiffer more durable freehub - New hub body profile for increased stiffness without adding weight - Ebike Specific hub designed for the demands of ebikes - Fully serviceable and rebuildable with simple tools - Available in 24, 28, 32 and 36 hole drillings - Available with all modern freehub bodies - End spacers can be easily swapped to suit different frame and axle standards - 6 bolt or Centrelock disc fitting - Available in Black, Silver, Bronze, Red, Blue, Orange & Purple

Round edge braking surface. Custom steel braking surface riveted to an aluminium central carrier. Standard 6 bolt fitting. Available in: 160mm only. Floating design deals with changes in temperature. Available in our six colour options. Weight: 115g. **IMPORTANT NOTICE**Please ensure you have sufficient clearance to use this rotor, pay attention to any possible interference with caliper mount, frame, etc. KEY FEATURES - Round edge braking surface - Custom steel braking surface riveted to an aluminium central carrier - Standard 6 bolt fitting - Available in: 140mm & 160mm - Floating design deals with changes in temperature - Weight: 115g - Available in black, silver, bronze, red, blue, purple & orange

The Tech 4 E4 builds on our 25+ years’ experience designing and manufacturing hydraulic brake systems. The Tech 4 uses all new internal sealing for reduced friction and the pivot spins on roller bearings, allowing the spring rate to be reduced. The lower spring rate in turn gives a lighter lever action, reducing rider fatigue and keeping our legendary feel and modulation. The updated E4 caliper utilises hybrid style Stainless steel pistons with a phenolic insert allowing for smoother movement and less maintenance, while still able to manage high temperatures without heat transfer during extreme use. Increased power versus Tech 3. Lever shape updated to provide a more ergonomic shape orientated to provide the best mechanical advantage during braking. Hinged clamp reducing weight and ergonomics. Shifter integration improved for more adjustability. Tool free bite point and reach adjustments. Rigid CNC machining. KEY FEATURES - Increased power versus Tech 3 - Lever shape updated to provide a more ergonomic shape orientated to provide the best mechanical advantage during braking. - Hinged clamp reducing weight and to improve ergonomics - Tool free bite point and reach adjustments - Hybrid piston design - Rigid CNC'd one piece caliper - Compatible with a wider range of current shifter options - Complete brake available in Black or Silver with colour accent options of; Black, silver, purple, red, blue, or orange. - Choose either standard or braided hose (braided hose is an extra cost) - 30% pressure increase compared with the Tech 3 brake - Reservoir area increased to lower overall stack height. - Shifter integration has been improved and now offers 30° of angle adjustment as well as neater packaging and compatibility with the latest shifters. Lateral adjustment on both sides of the master // cylinder is also possible to give a wide range of lever position options. - Hybrid-style pistons that allow smoother movement and require less maintenance, and a phenolic insert to manage heat transfer during extreme use. - The Tech 4 retains the tool-free bite point and reach adjustments from the Tech 3 - All Tech 4 brakes are supplied with new racing compound pads. For more information on all our pad compounds see the new pad guide here. - Maxium Rotor thickness for E4 caliper 2.3mm

At Hope we produce products for the true riders. This means developing the best components, not only for the extremes of downhill or EWS, but also for the punishing environment of XC racing and endurance riding. Here, balancing strength, weight and performance is key and we have now applied all our years of expertise into the clipless pedal. KEY FEATURES - Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release - Dual sided - Fully CNC Machined pedal bodies - Stainless steel clips and cleats - Pedals supplied with two cleats options - Large shoe/pedal contact area for maximum power transfer and stability - Replaceable pins for increased grip on Union TC (8 pins) - Available in black, silver, bronze, red, blue, orange and purple - Pedals run on three cartridge bearings and a maintenance free IGUS bush for smooth long term durability - Fully serviceable and re-buildable - Axle is high strength Cr-Mo, heat treated and plated - Titanium axle upgrades available - Q-Factor – 55mm - Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. - Large platform with option of 4 pins per side.

Brake pads include spring clip and pin Brake pads are dyno tested in-house in Barnoldswick Available for all our current brakes and older models All pads are rigourously tested by us and our Pro riders to ensure maximum performance and longevity We keep a wide range of pads to suit all our brakes

- Eten-I rounds out the lower end of the KS internally routed dropper post spectrum with a post that is perfect for new riders just getting used to the idea of on-the-fly seat height adjustment or more experienced riders looking for a value-priced solution. - Eten-I uses the same head and cartridge as the Eten Remote but moves the cable interface to the bottom of the post for compatibility with frames accommodating internally routed cables.

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Designed in conjunction with Aussie DH racer Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear depending on trail conditions.

With a tread design that deftly balances rolling speed with braking and cornering traction, it’s no wonder why the Minion DHF is one of the most imitated tires in mountain biking. Whether riding local trails, a backcountry epic, racing enduro or World Cup downhill, there’s a Minion DHF spec to meet your needs.

The Maxxis Rekon Race is a semi-slick XC race tire that features the lowest profile tread in our XC line. It is a great choice for dry XC trails and short track racing.

Compatible with all Presta pump heads and most sealant injectors, Fillmore is backward-compatible with whatever you got, and forward-thinking in every way. Made for mountain, gravel and 'cross rims up to 28mm deep, Fillmore is one of those upgrades you don't know you need until you try it. - Airflow - 3 times standard Presta air flow, easing tubeless tire set-up and reducing pumping force - No clogging - Patented poppet-style design eliminates clogging by shielding air hole from contact with sealant - Simplicity - Ability to inject sealant without removal of valve core simplifies maintenance - Adjustable - Micro-air adjustment feature allows for precise trail-side pressure changes

MUCH MORE THAN AN ENTRY-LEVEL TIRE. Affordable city and touring tire with remarkable puncture protection. Schwalbe Protection Level 5 due to muscular 3 mm PunctureGuard protection. The classic tread design is versatile and offers comfortable rolling characteristics. Fitted with high quality 50 EPI carcass and reflective lines. A recommendation for E-Bikes up to 25 Km/h.

- Unleashing profile and breathtakingly fast – especially when large volume counts. - As a 30-35mm wide road race version with V-Guard protection, G-One Speed is a tire for the real tough jobs. - It is also a guarantee for maximum speed in the extra-wide 50mm execution – of course not only at the fascinating beach races on Holland's coasts. - The new G-One Speed is an evolution of the former S-One and Big One.

LIGHTER, GRIPPIER, FASTER. The ‘turbo’ of spike tires. With up to 402 spikes it bites firmly into icy roads. The tungsten carbide core of each spike is clad in weight-saving aluminum. The tire remains agile and sporty. Brand new studded tires must be ridden around 40km on asphalt roads without heavy acceleration and braking. This 'bed-in period' will ensure studs are fully set, after which, the studded tires can be used normally. - Lighter, grippier, faster - The ''Turbo'' of spike tires - Agile and sporty - Please note, in order to ensure that spikes are permanently fixed, tires should be run in for about 40km (25 miles) on asphalt, while avoiding any fast acceleration or heavy braking.

- Rear tire specially made for indoor trainer - The compound has a much lower internal resistance

The MTB tire with the greatest range of applications. The all-rounder that works in every situation, no matter the weather, no matter the terrain. Widest possible range of use: for tour and all-mountain, for difficult cross-country tracks as well as technically challenging enduro trails. The Nobby Nic got a revised tread design this season: - Modern trail bike tread with stable shoulder blocks for even more traction - Enlarged gaps between blocks for better self-cleaning - Outstanding braking and forward traction due to special center stud arrangement - Performance Line, Twinskin - ECE: E-50 - 960g

The fastest downhill tire in the world! - Developed over two years in the World Cup races, including with DH overall World cup winner Amaury Pierron - Optimized 100% for precision - For even more aggressive cornering, shoulder lugs are 10% more stable compared to the Magic Mary - Long braking edges allow later braking point - Open shoulder area provides direct feedback and improves self-cleaning - Ramps on center lugs for optimal rolling characteristics - Evolution line, Super Downhill construction - Addix Ultra Soft compound - ECE: E-50 - 1320g

- For Trail and Cross Country - Extremely versatile all-round tire - Has larger side lugs for cornering performance - Fast rolling and lots of traction - Available in Super Ground, Super Trail, and Twinskin construction - Available in Addix Speedgrip, Addix Performance, and Addix Super Race compounds

- Royalgel™ padding that reduces pressure in the ischial bones area. - Central indent offers perineal relief with added elastomers to ensure stability. - Waterproof - Ideal for short to medium rides in the city.

- Cool Cover: helps reflect heat, so it stays cooler than traditional black saddles - Center channel cut out aids air flow and keeps blood flowing to all the right places - Water-resistant - Royalgel padding - Rails mounted on elastomers - Integrated Clip System

- Royal Vacuum Light (RVL) technology - Cool cover helps reflect heat, so it stays cooler than traditional black saddles - Water-resistant - Royalgel - Elastomers - Integrated Clip System

- Cool Cover: helps reflect heat, so it stays cooler than traditional black saddles - Center channel cut out aids air flow and keeps blood flowing to all the right places - Water-resistant - Royalgel - Manganese rails & elastomers - Integrated Clip System

- Create an air tight seal for BST rims - Can also be used as a lightweight rim strip for any rim