Components

Designed to offer a broad range of riders comfortable support and compliance, and shaped for a powerful, efficient pedaling position, the ultralight Amp saddle features an Advanced Forged Composite Technology base and Integrated Rail Design. Comfort is further enhanced with high-elasticity Particle Flow padding, Lightweight Reactive Foam and a pressure-relieving ergonomic center cut-out.

CushCore TRAIL provides an all-new option for riders looking for a performance/weight balance between our PRO and XC inserts. Additionally, CushCore TRAIL was engineered to provide more progressive sidewall support: the harder you push, the more support you’ll feel. Enabling supple tire response on flat corners and a stable sidewall when railing berms. Like all CushCore tire inserts, TRAIL absorbs shock and vibration, improves cornering, and prevents flats/rim damage … giving TOTAL CONFIDENCE for All Riders. Tire Widths: 2.1"-2.6" Inner Rim Width: 22mm-35mm Includes: (1) CushCore tire insert, (1) 44mm CushCore presta air valve, valve core tool, installation instructions, and rim stickers.

The Vector 4Seasons Ultra High-Performance road tire utilizes the latest developments in materials and construction methods to optimize performance and protection across a wide range of wet and dry conditions. Who rides this tire? As a serious competitor the Vector 4Seasons gives you the freedom to perform anywhere. Where does this tire perform best? With its reinforced sidewall and anti-puncture belt, the Vector 4Seasons is at home on any road you ride, at any time. FREEDOM TO PERFORM Riding in less-than-ideal conditions should not require a complete sacrifice in tire performance. The Vector 4Seasons brings ultra high performance to your daily ride, with low rolling resistance and added protection to keep you moving forward across a wide range of conditions. PERFORMANCE OVER MORE CONDITIONS The Vector 4Seasons features bead to bead Armor protection, R:Shield under-tread breaker belt and Dynamic:Silica4 compound for improved wet grip and durability. TUBELESS COMPLETE CONSTRUCTION Goodyear Bicycle Tires proprietary design that features all the benefits of a Tubeless Ready (TLR) tire with additional air retention properties. A Multi-compound material layer is added to our high-pressure Road-UHP tire casing allowing for improved air retention while providing additional puncture and cut protection with minimal weight increase. Our unique design means more sealant remains after installation, ready for the moment you need it. ARMOR PROTECTION Combining excellent anti-cut properties with minimal impact on casing suppleness and weight. Armor Protection enhances the Vector 4Seasons UHP road tire’s capabilities. DYNAMIC: SILICA4 COMPOUND The Vector 4Seasons brings Goodyear Ultra High-Performance to a broader range of conditions with a reinforced casing, wider tread cap and dedicated Dynamic:Silica4 compounding to minimize rolling resistance while enhancing wet grip.

Versatile Aluminium E-Bike Cranks specifically designed for the latest breed of mountain e-bikes. Proudly Designed, Tested and Manufactured in Barnoldswick, UK. Now produced three different offsets to suit Specialized, Brose/Yamaha and Bosch motors. KEY FEATURES - Designed for maximum ground clearance - Self extracting system for easy fitting and removal - Available in 155mm and 165mm length - Optimised Q-factor for compatibility with most frame/motor combinations - Arms available in black, silver, bronze, blue, red, purple and orange - Proudly Designed, Tested and Manufactured in Barnoldswick, UK - Weight: 472g - Forged and CNC machined 7150 series aluminium alloy crank arms - Compatible with motor systems using an ISIS spline axle/crank arm interface only.

Versatile Aluminium E-Bike Cranks specifically designed for the latest breed of mountain e-bikes. Proudly Designed, Tested and Manufactured in Barnoldswick, UK. Now produced three different offsets to suit Specialized, Brose/Yamaha and Bosch motors. Specialized Offset - This crank model is most suitable for Specialized Turbo systems using the ISIS mount including: Levo, Kenevo, Vado, Como, Turbo Levo e-bikes. Please note this model is not suitable for any Levo SL MTN E-Bikes using the Specialized SL 1.1 M30 motor. KEY FEATURES - Designed for maximum ground clearance - Self extracting system for easy fitting and removal - Available in 155mm and 165mm length - Optimised Q-factor for compatibility with most frame/motor combinations - Arms available in black, silver, bronze, blue, red, purple and orange - Proudly Designed, Tested and Manufactured in Barnoldswick, UK - Weight: 472g - Forged and CNC machined 7150 series aluminium alloy crank arms - Compatible with motor systems using an ISIS spline axle/crank arm interface only.

Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all of our experience into a product to meet and exceed the demands of current and future bike technology. KEY FEATURES - Improved sealing to stop dirt ingress and to reduce drag - New Labyrinth seal has zero drag for incredible freewheeling performance - New Pawls/Springs design to increase longevity, load capacity & a reduction of drag. - 54 points of engagement with 6 pawls engage simultaneously for increased durability - Wire cut pawls from high strength steel for maximum strength. - New step down axle design for a stiffer more durable freehub - New hub body profile for increased stiffness without adding weight - Fully serviceable and rebuildable with simple tools - Available in 32 hole drilling - Available with all modern freehub bodies - Steel freehub bodies in Microspline, HG and XD - End spacers can be easily swapped to suit different frame and axle standards - 6 bolt only

148mm boost conversion kit, compatible with Pro 2 EVO and Pro 4 135/142 hubs

Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all our experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6 pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings....And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future proofing your wheels. Completely new for the Pro 5 is the option of Centrelock disc fitting and an e-bike specific hub that comes with a freehub tailor made for the stresses and strains of e-bike use. Features >> Improved sealing to stop dirt ingress and to reduce drag >> New Labyrinth seal has zero drag for incredible freewheeling performance >> New Pawls/Springs design to increase longevity, load capacity & a reduction of drag. >> Increased engagement from 44 to 108 with a new offset 6 pawl freehub design >> Wire cut pawls from high strength steel for maximum strength. >> New step down axle design for a stiffer more durable freehub >> New hub body profile for increased stiffness without adding weight >> Ebike Specific hub designed for the demands of ebikes >> Fully serviceable and rebuildable with simple tools >> Available in 24, 28, 32 and 36 hole drillings >> Available with all modern freehub bodies >> End spacers can be easily swapped to suit different frame and axle standards >> 6 bolt or Centrelock disc fitting

Building on Hope’s 30+ years of manufacturing hubs, the Pro 5 is the combination of all our experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6 pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings...And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future proofing your wheels. Completely new for the Pro 5 is the option of Centrelock disc fitting and an e-bike specific hub that comes with a freehub tailor made for the stresses and strains of e-bike use. Features >> Improved sealing to stop dirt ingress and to reduce drag >> New Labyrinth seal has zero drag for incredible freewheeling performance >> New Pawls/Springs design to increase longevity, load capacity & a reduction of drag. >> Increased engagement from 44 to 108 with a new offset 6 pawl freehub design >> Wire cut pawls from high strength steel for maximum strength. >> New step down axle design for a stiffer more durable freehub >> New hub body profile for increased stiffness without adding weight >> Ebike Specific hub designed for the demands of ebikes >> Fully serviceable and rebuildable with simple tools >> Available in 24, 28, 32 and 36 hole drillings >> Available with all modern freehub bodies >> End spacers can be easily swapped to suit different frame and axle standards >> 6 bolt or Centrelock disc fitting

KEY FEATURES - Brake pads include spring clip and pin - Brake pads are dyno tested in-house in Barnoldswick - Available for all our current brakes and older models - All pads are rigourously tested by us and our Pro riders to ensure maximum performance and longevity - We keep a wide range of pads to suit all our brakes

Recondition or perform maintenance on your Hope hydraulic disc brake levers with this master cylinder seal and rebuild kits.

At Hope we produce products for the true riders. This means developing the best components, not only for the extremes of downhill or EWS, but also for the punishing environment of XC racing and endurance riding. Here, balancing strength, weight and performance is key and we have now applied all our years of expertise into the clipless pedal. KEY FEATURES - Pedals run on three cartridge bearings and a maintenance free IGUS bush for smooth long term durability - Fully serviceable and re-buildable - Axle is high strength Cr-Mo, heat treated and plated - Titanium axle upgrades available - Q-Factor – 55mm - Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. - Large platform with option of 7 pins per side or foot plates to give maximum contact between the shoe and pedal and so provide the greatest stability. - Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release - Dual sided - Fully CNC Machined pedal bodies - Stainless steel clips and cleats - Large shoe/pedal contact area for maximum power transfer and stability - Replaceable pins for increased grip on Union GC (14 pins) - Foot plate option on Pedal for maximum shoe/pedal contact

- 11 speed wide range cassette - 7075 Aluminum largest two sprockets - Alloy spiders, spacers and lockring - Fits Shimano/SRAM freehub - 563g (11-50t)

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

RaceFace Crank Arm Fixing Bolts - M15

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

Hope Pad Clip - Fits Tech and Tech Evo M4, X2, and V2 Brakes

- Aheadset preload adjusting bolt

Hope Brake Lever Parts

Service parts for Fox suspension.

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

Replacement small parts for Hope disc brake Hope disc brake calipers.

Replacement piston and seals for Hope disc brake calipers.

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

1/2" X 1/8" -Pin Length: 9.2 mm

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

- Converts Schrader rims to Presta - Rubber - Sold individually

Champion 2.0 Black Spokes - One 264mm spoke = 7g

Competition Black Spokes for wheel service and repairs. - Double Butted: 2.0/1.8/2.0 - Box of 100 Spokes - One 264mm spoke = 6g - Nipples sold separately

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only

Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - Compatible with straight pull hubs only - One 264mm spoke = 5.9g - Nipples sold separately

FSA Mega Exo Small Parts.

FSA Mega Exo Small Parts.

This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever

Heavy duty and extra wide PVC rim strips for maximum tube protection.

Brass compression olive for Hope hydraulic disc brakes.

- Crown Race - Size: 27.0mm

- Type: Lock washer - Size: 1" Keyed

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

- Model: Replacement bolt - Compatibility: Allen, M5x16

Replacement piston and seals for Hope disc brake calipers.

Replacement piston and seals for Hope disc brake calipers.

The Gyro G3 upper top plate is designed for use with the G3 detangler.

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.

- Crown Race MX - Size: MX TH 26.4mm

- Rubber - Color: Black

Air Spring Volume Reduction Kit - Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer

The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

Schwalbe High Pressure Rim Tape effectively protects the tube against mechanical damage. - Elastic for ease of installation - High pressure: 8 bar / 116 psi