Components

Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination. KEY FEATURES - Replaceable stainless steel bearings (resist corrosion) - Split crown race for easy installation and removal - Wide selection of different cup sizes to fit most headset combinations - Multiple seals to keep out the elements - Available in black, silver, bronze, blue, red, purple and orange - Top and bottom cups are available separately allowing our headsets to fit almost any frame and fork combination - Head Doctor top cap sold seperately - Headset cups use custom made, replaceable stainless steel bearings to resist corrosion - The cups are all machined from 2014 T6 aluminium - Sealing is achieved through an adjustable taper ring cover and integrated rubber seal

Pro 2/3/Evo Pawl (Set Of Four) + Springs (x4)

Recondition or perform maintenance on your Hope hydraulic disc brake levers with this master cylinder seal and rebuild kits.

Thanks to the innovative formula of KMC GO CHAIN WAX, the premium KMC chains treated with our wax offer next to high efficiency an unrivalled durability. Compared to oil-based lubricants, waxed chains are less susceptible to dirt build-up, increasing drivetrain life and reducing cleaning intervals. - Compatible with all 11-speed derailleur systems - Waxed with KMC GO - Slotted inner- and outer plates and hollow pins - Perfect shifting thanks to Double X-Bridge - Includes a MissingLink - Size: 1/2" X 11/128" - Pin length: 5.65 mm - Weight per 110 links: 244 g - Length: 118 links

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

RaceFace Crank Arm Fixing Bolts - M15

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

Hope Pad Clip - Fits Tech and Tech Evo M4, X2, and V2 Brakes

- Aheadset preload adjusting bolt

Hope Brake Lever Parts

Service parts for Fox suspension.

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

Replacement small parts for Hope disc brake Hope disc brake calipers.

Replacement piston and seals for Hope disc brake calipers.

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

1/2" X 1/8" -Pin Length: 9.2 mm

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

- Converts Schrader rims to Presta - Rubber - Sold individually

Champion 2.0 Black Spokes - One 264mm spoke = 7g

Competition Black Spokes for wheel service and repairs. - Double Butted: 2.0/1.8/2.0 - Box of 100 Spokes - One 264mm spoke = 6g - Nipples sold separately

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - Compatible with straight pull hubs only - One 264mm spoke = 5.9g - Nipples sold separately