Electric/Gas Motor Kits

Powerful SHIMANO STEPS motor is strong enough to handle the steepest of trails, yet intuitive enough to give you just the right amount of support every pedal stroke along the way. - Designed specifically to give you that natural feel of riding a normal MTB - Weighs only 2.8kg, one of the lightest motors on the market - Stable, smooth intuitive power for improved bike handling over every section of trail - Solidly supports speeds up to 25 km/h TECHNICAL SPECIFICATIONS - High power with max output of 70Nm (250W) - Designed for a shorter chain stay to match geometry and handling of a normal MTB - Narrow Q-factor of 177mm (same Q-factor as current XT) provides an efficient pedal stroke - Stable, smooth assist power output regulated by cadence - Direct pedalling feel (with or without pedal-assist activated) - Improved pedalling efficiency with dynamic chain engagement - Better tire clearance - Clearance for suspension linkage - Drive Unit cover hides cables and mounting bolts for a clean look (SM-DUE80-A) - Direct mount (53mm CL) or frame mount (50mm/53mm CL) options

Smooth and Silent Riding with INTELLIGENT POWER : Discover high-level E-bike performance. Shimano STEPS lifts E-bike enjoyment to the next level by optimally balancing range, lightweight performance, and low noise—with battery power to spare. SENSOR TECHNOLOGY : Shimano STEPS incorporates sensors that pick up information about torque, speed, cadence, and crank position so that the system can provide smooth and optimally matched pedaling force. -Integrated sense of design with the handlebar - Center mount for easy viewing while riding - Displayed parameters: assist mode, battery charge level gear position, estimated range, range overview - Intuitive display layout - Angle can be adjusted to suit a variety of riding positions

- BT-E6000(battery) / SM-BNE60 (battery mount) - Consistent performance, minimally affected by weather and temperature - Long life design, greater than 1,000 charge cycles - BT-E6000 features integrated sense of design with carrier

- For use with Shimano STEPS E6000 drive system

- BT-E6010 (battery) / SM-BME61 (battery mount) - Consistent performance, minimally affected by weather and temperature - Long life design, greater than 1,000 charge cycles - BT-E6010 features easy mounting and release

The Firebolt Switch Unit control with intuitive operation is ergonomically designed for a MTB. It’s the ultimate in comfort and reliability as you switch between modes while blasting through the trails. - The e-MTB Switch Unit (SW-E8000-L) is ergonomically designed for the specific demands of MTB riding such as riding through tight singletrack and bumpy terrain - Accurate, smooth shifting between power-assist modes regardless of weather or terrain conditions - Switch between Boost, Trail, Eco and Walk settings in a flash during the ride. Shifters incorporate the same design and shifting feel as XT Di2 TECHNICAL SPECIFICATIONS - Four support settings to choose from: Boost, Trail, Eco, Walk - Boost: Complete support for a max boost and expert climbing - choose between high, med, or low level of assist - Trail: Intuitively smooth gradated support through even the most demanding singletracks. Automatically adjusts its level of support based on pedal pressure. Choose between high, med, or low level of assist - Eco: Solid support for those long expeditions - Walk: Assists you when you need to get off the bike and walk it—simple to activate

Ultra-durable, powerful battery specially designed for the rigors of mountain biking. - MTB-dedicated compact, low profile design for improved impact and vibration resistance - High capacity long-lasting Li-Ion battery of 504 Wh to cover more territory - Supported travel up to 100 km on one charge - 1,000 charge cycles with no significant power loss TECHNICAL SPECIFICATIONS - Weatherproof and waterproof - Quick charging time: 80% in 2.5 hours, from 0 to 100% in 5 hours - Computer’s LCD display shows battery capacity information based on which gear you are riding, and which support setting you are using. This helps you to easily determine current remaining battery charge. POWER-ASSIST MODES - Power-assist mode and capacity / travel distance with estimated altitude meters (based on combined rider/bike weight of 100 kg (can vary depending on usage, rider profile, riding conditions, battery life): - Boost: 50 km (400 hm) - Trail: 75 km (600 hm) - Eco: 100 km (800 hm)

BATTERY - Ultra-durable, powerful battery specially designed for the rigors of mountain biking - MTB-dedicated compact, low profile design for improved impact and vibration resistance - High capacity long-lasting Li-Ion battery of 504 Wh to cover more territory - Supported travel up to 100 km on one charge - 1,000 charge cycles with no significant power loss POWER-ASSIST MODES - Power-assist mode and capacity / travel distance with estimated altitude meters (based on combined rider/bike weight of 100 kg (can vary depending on usage, rider profile, riding conditions, battery life): - Boost: 50 km (400 hm) - Trail: 75 km (600 hm) - Eco: 100 km (800 hm) TECHNICAL SPECIFICATIONS - Weatherproof and waterproof - Quick charging time: 80% in 2.5 hours, from 0 to 100% in 5 hours - Computer’s LCD display shows battery capacity information based on which gear you are riding, and which support setting you are using. This helps you to easily determine current remaining battery charge