Parts & Accessories

Remote Cable Guide for rear trainer

Resistance Adjustment lever for rear trainer

Remote connector for rear trainer

Micro Adjust Knob for rear trainer

Replacement Lower Case for B60/ Magride 60

Rear Thru Axle Adapter 12mm, 1.75mm pitch

Replacement Upper Case for B60/ Magride 60

Left Side Coupling for rear trainer

Features
- Front wheel riser block
- With handle

Remote cable for LR-Live Ride series

• Gray

Use these axle nuts to put a city or track bike in a Tacx trainer. The available axle nuts are M10x1 (T1415) and 3/8 Shimano Nexus (T1416). For use with Tacx classic trainers only

The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.

This narrow towel was developed specifically for indoor bike training sessions and is used by many professional riders during their warm-up or indoor training sessions. - Highly absorbent - Measures 30cm x 115cm

CycleOps' Sweat Guard is a valuable accessory for any trainer. It keeps corrosive sweat from harming your bike and home. It's made from soft, absorbent, washable terry cloth and is attached with elastic and Velcro straps. Two front pockets keep the remote, phone, or food close by while you're hammering away.

Remote for B60/LR340/RDA

The Saris Leveling Block keeps your bike level with your trainer. - Adds stability to your training ride. - For use with any rear wheel-mounted trainer. - Raises front bicycle tire 1.1 inches (2.8 cm) off the ground

Remote for LR760/LR960

A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.

• Plastic riser block allows the position of front wheel at one of two heights

This kit includes drive side and non-drive side adapters for bicycles with 12x142 or 12x148 thru axles. Note: This adapter is compatible with KICKR CORE and KICKR v4(2018) and newer models of KICKR. Note: Kit also includes Shimano style and SRAM XD/XDR style freehub lock nuts that need to be installed.

This height-adjustable front wheel support can simulate both flat terrain and slopes perfectly - Unique design with 5 levels lets you adjust the height of your front wheel to simulate hill climbs up to 6% - Anti-slip rubber feet eliminate handlebar vibrations - Internal design that guarantees maximum wheel stability - Suitable for both road and MTB - You can attach to the trainer frame when not in use for easy transport and storage

Features
- Suitable for Tacx trainers with rear-wheel drive only
1: T1706 E-Thru trainer axle M10x1, with metric fine thread. For hubs with axle skewer attachment 135×10mm: various Swiss and Shimano. Length: 162.5mm
2: T1707 E-Thru trainer axle M12x1, with metric fine thread. For hubs with axle skewer attachment 142×12mm: various DT Swiss and Shimano. Length: 162.5mm
3: T1709 E-Thru adapter X-12 (>142 mm)
4: T1711 E-Thru trainer axle M12x1, with metric fine thread. For hubs with axle skewer attachment 142×12mm: DT Swiss RWS axle skewer (conical and flat), Syntace X-12 system (Specialized) and various Shimano. Length: 175mm
5: T1710 E-Thru trainer axle M12x1.5, with medium thread. For hubs with axle skewer attachment 142×12 including Shimano SM-AX65, SM-AX75, SM-AX76 and SM-AX78. Length: 162.5mm
6: T1708 E-Thru trainer axle M12x1.75, with standard threaded cartridge. For hubs with a Maxle axle skewer attachment 135×12, 142×12, 150×12 mm and Trek ABP 142×1. Length: 179.5mm

The blue Tacx trainer tyres have been developed specifically for riding on the indoor trainers. The special rubber minimises the risk of overheating, slipping and wear and tear. They are also quieter than the regular rear tyres on racing bikes or mountain bikes.

Features
- Specifically developed for riding on a home trainer
- Not suitable for outdoor cycling
- Reduce noise
- Prevent wear and tear on the trainer
- Unique Tacx compound providing extra long durability

Keeps corrosive sweat from reaching your frame. - Cell phone pouch included.

The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.

For a stable, worry-free ride with any rear wheel-mounted trainer. Product Features - For a stable, worry-free ride with any rear wheel-mounted trainer. - Unique 3-level design lets you select the level of difficulty. - Stack two blocks to simulate climbing workouts. Three different positions to raise your front wheel and simulate hill climbs - 2.1 inches (5.3 cm) - 2.7 inches (6.8 cm) - 3.1 inches (7.9 cm)

- Includes Sweatcover for Smartphone (T2931) and Towel (T2940) - 891076

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

This durable, padded travel bag is made to protect and secure your Pro Mechanic HD, Pro Mechanic, or Sport Mechanic repair stand when it's not in use. It features a zip closure, carry handles, and a clear card window for your luggage tag. This travel bag can also accommodate older Feedback repair stands such as the Pro Elite and Classic. Our repair stand travel bags are the best protective accessory for ensuring your stand looks new for years to come. Be the most popular rider at the trailhead with a Feedback Sports repair stand, and keep it looking new with a protective travel bag. Features: - Sized to fit the Pro Mechanic HD repair stand. - Also compatible with Pro Elite, Sport Mechanic and Ultralight repair stands. - Maximize the portability of your Feedback Sports repair stand. - Protect your stand’s aluminum finish and your other equipment when traveling. - Travel bag is water-resistant, durable, and padded. - Enough space for a repair stand, Flop Stop, and Pro Truing Stand. - External window for business cards / ID card. - Padded Velcro™ strap for comfortable carrying and transport. - Full-length, dual-zipper design. - Rugged end-loops for vertical storage when not in use. - 1-Year Warranty.