Tires/Tubes

Type: Patch Cement Size: Individual tube

Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex

Specifically designed for the vulcanization of tube patches, valve patches, and rubber-based tube valve repair units.

- Plastic storage box - Contains 7 large patches cement, and scuffer

• Includes a plastic storage box, 6 patches, cement, and scuffer

- Anodized alloy construction - Fits standard Schrader valves

- Forged alloy construction - Fits Schrader valves

- 0.9mm wall thickness - 700c x 18 – 25 = 27 x 1 - 700c x 28 – 35 = 27 x 1-1/8, 1-1/4

- The Pressure Relief Valve Stem Nut has been designed to ensure that an improper tubeless tape job doesn’t result in a damaged rim. - If the tubeless seal between tire’s air chamber and the rim’s cavity is breached, the rim’s cavity can become pressurized resulting in a pressurized rim and potential delamination of the rim’s sidewall. The Pressure Relief Valve Stem Nut prevents this from happening by creating an escape for the air via fluted reliefs on the inner diameter of the nut. - Air escaping from these ports, indicates a compromised tubeless seal. - Recommended for all tubeless SES wheelsets as well as other brand road tubeless wheelsets. - Each order includes two nuts, enough for one wheelset.

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve Type: Schrader - Valve Length: 32mm - Valve Core: Removable - Butyl rubber - Wall Thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Valve stem: Smooth - Butyl rubber - Wall thickness: 0.9mm

- Butyl rubber - Removable valve core - Schrader valve - Wall thickness: 0.9mm

- Butyl rubber - Economy tube - Schrader valve - Wall thickness: 0.9mm

Compatible with all tubeless road, MTB and gravel tires. Refill packs with 10 repair plugs (5x thin and 5x thick).

- Valve type: Schrader - Valve core: Removable - Valve stem: Smooth - Butyl rubber - Wall thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve: Presta - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve Type: Schrader - Valve Core: Removable - Butyl rubber - Wall Thickness: 0.9mm

- Butyl rubber - Removable valve core - Schrader valve - Wall thickness: 0.9mm

- Butyl rubber - Economy tube - Schrader valve - Removable valve core - Wall thickness: 0.9mm

- Tubeless Valve Rim Washer - Compatible with: Alloy Road and Carbon MTB Rims

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Butyl rubber - Economy tube - Wall thickness: 0.9mm - Removable valve core

- Butyl rubber - Economy tube - Removable valve core - Wall thickness: 0.9mm

- Standard 1mm tube thickness - Schrader valve

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube. - Decreased air loss design - Butyl rubber - 40mm valve length

- 0.9mm wall thickness - Removable valve core - 700c x 18 – 25 = 27 x 1 - 700c x 28 – 35 = 27 x 1-1/8, 1-1/4

Odyssey's Air Supply tubes are specifically sized to fit modern BMX tires, and they are manufactured with a stronger emphasis on quality versus simply chasing the lowest possible price. On average, the Air Supply BMX tube retains air significantly longer than others currently available on the market. This is down to both the rubber that is used, and because of strict quality control during manufacturing. It is normal to assume that a “tube is a tube,” but a higher-quality tube will always last longer than a cheap tube during comparable everyday use.

- Shim adds support to Presta stem used in a Schrader rim

- 0.8mm walls (0.9mm walls for 16", 20", 24" sizes) - Puncture resistant

The Maxxis Welterweight tubes are 0.8mm thick and available with Presta or Schrader valves.

- 0.8mm walls (0.9mm walls for 16", 20", 24" sizes) - Puncture resistant

- Tubeless Valve Rim Washer - Compatible with: Carbon Road Rims

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube. - Decreased air loss design - Butyl rubber - 40mm valve length

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube. Special quality control that prevents unpleasant surprises. - 40mm valve length

- Valve Type: Presta - Valve Stem: Smooth - Valve Core: Non-Removable - Wall thickness: 0.9mm

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube. - Valve Length: 40mm

- Valve Type: Presta - Valve Core: Non-Removable - Wall Thickness: 0.9mm

- Butyl rubber - Economy tube - Schrader valve - Removable valve core - Wall thickness: 0.9mm

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube.

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube.

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube. Special quality control that prevents unpleasant surprises. - 40mm valve length

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube.

- Repairs punctures up to 1/4 (6mm) - Optimized for temps down to 15degF (-9.4degC) - Synthetic later minimizes the risk of allergic reactions

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall Thickness: 0.9mm

- Butyl rubber - Removable valve core - Schrader valve - Wall thickness: 0.9mm

CST Replacement Scooter Tires are ideal for OE replacements or repair.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling. These tubes fit older Schwinn bicycles with 24-inch wheels. - For use on rims with ISO diameter: 547mm

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling. - Valve length: 48mm

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

- 0.8mm walls (0.9mm walls for 16", 20", 24" sizes) - Puncture resistant

Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable

Surly Rim Strips have one job and they do it well. The 58mm nylon rim strip is purpose-built for the Clown Royal Rim, and Moonlander bike.