Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Riser

$79.99 - $89.99
Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep
$235.00
Our Milhouse Handlebar has the distinction of being the first and only of its kind: A full carbon moto-inspired riser bar. Featuring a 16-degree backsweep and 8-degree upsweep for comfort and control, it's tested and approved for getting rad on the roughest terrain. A statement piece for custom builders and upgraders alike, the Milhouse is equally at home on klunkers, bikepacking rigs, singletrack steeds, or simply cruising the streets with style. Trimmable ends marked with easy-to-read graphics allow you to dial in your fit for maximum confidence wherever the trail takes you. - Unidirectional carbon fiber construction - Trimmable ends, made easy with graphic markings - No rider weight limit - ASTM Condition 3 – For rough off-road riding and jumps less than 24" - 90mm clamping area to fit Salsa Anything Cradle - 31.8mm clamp, 70mm rise, 16-degree backsweep, 8-degree upsweep - 825mm wide - Weight: 288g
$158.00
Whisky's No.9 Riser Bar features a 25mm rise and a 5-degree upsweep to offer a slightly more upright riding position that increases control and comfort. It’s wide, sleek, and tested to the highest standards to deliver a ride you can trust mile after mile. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.
$165.00
The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package. - Unidirectional carbon fiber construction - 35mm stem clamp - 8 degrees of backsweep with 5 degrees of upsweep - Trimmable ends, made easy with graphic markings - Rated to ASTM Condition 4 for extreme off-road riding
$210.00
Occupying a class all its own, our Winston Handlebar is a performance carbon mustache bar loaded with versatility and flare. Featuring a 25mm rise and 73-degree backsweep, it offers compatibility with road, mountain, and bar-end controls. Pretty enough to punch up commuter rigs and sport touring bikes alike, it's built tough to handle everything from rough, off-road conditions to long rides in the country. Comfortable in both the drop and riser positions, the unique and multi-functional Winston is sure to inspire upgrades and eye-catching custom builds. - Compatible with road, mountain, and bar-end controls - Tested to ASTM 3 - 90mm clamping area to fit Salsa Anything Cradle - Can be ridden in up or down position - Unidirectional carbon fiber construction - Weight: 250g
$24.99 - $32.99
This mid-rise handlebar provides smooth lines and pure comfort - Black powder coat - 1"(25.4mm) clamp, 5.25" rise, 27" wide - Handmade in Maysville, Kentucky
$28.99
With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable. - Chrome finish - Made in the USA - Weight: 372g - Lever Compatability: Mountain 22.2mm
$28.99
With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable. - Chrome finish - Made in the USA - Weight: 726g - Lever Compatibility: Mountain 22.2mm
$75.00
The Atmos 7k aluminum riser bar series feature a 9° backsweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminum, the bar weighs just 250g at full width. - 760mm wide - Wide to start and trimmable by 30mm each side - Made from tough 7050 lightweight aluminum SPECIFICATIONS - Type: Riser - Application: XC - Clamp Diameter: 31.8mm - Width: 760mm - Backsweep (degrees): 9
$99.99
TruVativ is proud to announce the TRUVATIV CoLab Series, a collection of bars specifically engineered to match the demands of each signature athlete's discipline and riding style — and to enhance each rider's cockpit interface. - Upsweep: 5° - Backsweep: 9° (760mm bars) - Backsweep: 7° (all other bars)
$194.00
On the big days, it's the small comforts that make the ride better, longer. That's why we re-engineered our carbon riser bars to improve feel, flex and rider positioning and reduce trail buzz. These bars are stiff, precise and forgiving. With a re-tuned carbon laminate, your shoulders, arms and hands keep fresh all day. - Available in 760mm carbon with 20mm rise - 35mm clamp - Super-wide to start and trimmable by 40mm (20mm each side) - Specialty tuned carbon laminate to absorb noise while maintaining stiffness SPECIFICATIONS - Type: Riser - Clamp Diameter: 35.0mm - Width: 760mm - Rise: 20mm - Backsweep (degrees): 7
$70.00
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendent geometry from TruVativ's best enduro rider’s input - Backsweep: 9° - Upsweep: 5°
$180.00
RIP, NO RATTLE. Arm fatigue is real. The solution? More muscle. Or, our new carbon laminate, made to tackle the trail buzz, not transfer it. We re-engineered our bars to improve rider position (adding 5mm rise) and reduce the chatter transferred to the hands and arms. These bars offer the right bit of flex while keeping things stiff, precise, and responsive. Features: - Super-wide to start and trimmable by 40mm (20mm each side) - Specialty tuned carbon laminate to absorb noise while maintaining stiffness Specifications: - Clamp Diameter: 35.0mm - Width: 800mm - Material (HB): Carbon - Rise (HB): 25mm - Type (bar): Riser - Backsweep (degrees): 9 - Upsweep (degree): 5
$70.00
Combine a proven shape, proven width, proven materials, and a take-no-prisoners approach, and you’ve got the 7050 Descendant riser bar. It’s stiff, tough, dependable, and gives you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendant geometry from TruVativ's best enduro rider’s input - Backsweep: 7° - Upsweep: 5°
$199.99
Proven shape, proven width, proven materials, and the artistic touch of Troy Lee Designs: voilà, the TRUVATIV CoLab TLD Carbon riser bars. These bars are stiff, tough, dependable, and give you all the comfort and positive steering feel you want. This is art on your bars for artistry in the corners. - Stiff, precise, and width-optimized for enduro, trail and aggressive xc - Carbon fiber perfection - DESCENDANT geometry from their best enduro rider’s input - Signature Troy Lee Designs style
$75.00
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Material: Al-7050 - Width: 800mm - Backsweep: 9-degrees - Rise: 25mm - Upsweep: 5-degrees - Colors: Black
$180.00
It's Stiff, Not A Stiff. It's the little things that matter most. That's why we scrutinized our carbon riser bars, tasking our pros and engineers to make great even better. The result? We added 5mm to the rise of our widest bar; and fine-tuned the carbon laminate. This translates to an improved riding position, more feel and flex, and less arm fatigue making your time on the trail more smiles, less chatter. Features: - Super-wide to start and trimmable by 40mm (20mm each side) - Specialty tuned carbon laminate to absorb noise while maintaining stiffness Specifications: - Clamp Diameter: 31.8mm - Width: 760mm, 800mm - Material (HB): Carbon - Rise (HB: 25mm - Type (bar): Riser - Upsweep (degree): 5
$70.00
Combine a proven shape, proven width, proven materials and a take-no-prisoners approach, and you’ve got the new Carbon 7050 Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Material: Al-7050 - Width: 760mm - Backsweep: 7-degrees - Rise: 20mm - Upsweep: 5-degrees - Colors: Black
$99.99
Truvativ design built in collaboration with, and featuring the creativity of, Troy Lee Designs. The Truvativ CoLab TLD bar is the command center of cornering with an artistic flair. - Includes Rockshox sticker pack to give fork and handlebar a unified custom look - Stiff, precise and wide - Signature Troy Lee Designs style - Geometry and 7050 aluminum are designed for DH and gravity events - Back Sweep (deg): 9 - Upsweep: 5 - Weight: 349g - Material: Aluminum
$33.00
TruVativ's tough Hussefelt Comp Riserbar is made from butted aluminum for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
$50.00
TruVativ's super-tough Hussefelt Riserbar is made from triple-butted AL-66 for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
$78.00
In today’s fast-paced world of riseless flat bars and far-too-aggressive-for-our-liking cockpits, Surly harkens back to simpler times. They wanted a handlebar that would suffice for a relaxed cruise to a favorite windowless bar, but would also be suitable should a person decide to take the long way home. The Sunrise Bar is a cruiser bar, a trail bar, and a BMX bar all rolled into one. It has a 22.2mm clamp diameter, but Surly included some Problem Solvers shims so you can mount it up to your fancy 31.8mm stem. Material: CroMoly steel Clamp diameter: 22.2mm; Includes shims for 31.8mm clamp Width: 820mm; Can be cut to 720mm Rise: 83mm Sweep Angle: 14.7 degree backsweep, 6.7 degree upsweep Weight: 778g including shims Color: Black
$84.00
The Terminal Bar blends cruiser-style comfort with off-road touring performance. Able to run with a 40mm drop or rise, its swept-back design makes it great for long rides on rough, technical terrain. - 22.2mm diameter grip area; good to go for MTB shifters, brake levers, and grips - 34 degree backsweep with a 40mm + / - rise
$15.99
Chrome plated long-horn style design.
$24.99 - $37.79
Lightweight aluminum construction with a versatile riser bar design.
$13.99
Sturdy steel construction with a versatile riser bar style.
$18.59 - $20.99
- Slightly shorter version of the popular hi-rise style - Available in chrome plated and black versions
$84.99
Anyone who victoriously tears off their shirt after a clip, definitely deserves their own bar. Brett Silva has been on a tear lately and we're stoked to be offering the new BRETT bar. - Brett Silva Signature - Laboratory tested and team proven 4130 chromoly with post-weld heat-treatment - Large radius bends for greater durability - 1.8/1.3 thick multi-butted main tubing - ED coating for anti-corrosion protection - Guaranteed against manufacturing defects
$69.99
Based on team rider feedback, Sunday introduces the new Nightshift Handlebars. - Laboratory tested and team proven - 4130 chromoly with post-weld heat-treatment - Large radius bends for greater durability - Traditional 7/8" crossbar for strength - 1.8/1.3 thick multi-butted main tubing - ED coating for anti-corrosion protection
$114.99
- Completely redesigned geometry 780mm wide for the aggressive Trail or All Mountain rider. - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm - Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR - Material: Zirconium Doped 7-Series Alloy - Weight (g): ±270g (15) / ±275g (25) - Diameter (mm): 31,8 - Rise (mm): 15 / 25 - Length (mm): 780 - Geometry (deg°): 5° up x 7° back - Finish: Shot peen anodized, decal logos
Page 1 of 4 Next page