Pedals

- One-piece ABS resin body - Molded pins - 320g pair

Light, impact resistant. New for 2018 is the Synth Pedal. An injection molded, nylon reinforced platform that is light, impact resistant and won’t break the bank. Modeled after our Scarab pedal, the Synth features a large platform with true concave and our proprietary pin system. It uses the same high-end axle and bearing assembly as on our Scarab and Contact models so you can count on long-life and smooth performance, with common serviceability components available from Chromag.

The TRAIL FUSION pedals give you superior control of your mountain bike and far greater performance than traditional flat pedals. Their wide composite platform offers increased stability, better power transmission and ultimate comfort, allowing you to pedal with confidence and get the most out of your ride. And worry no longer when the trail gets technical: each pedal face features eight replaceable pins for maximum grip. Customize your look with one of the 5 available colors and forget your limits out on the trail!

- Rugged nylon construction for the toughest trails - Large 106x100mm platform provides superior stability - Concave platform and grip pins offer tenacious grip - 8 replaceable threaded steel traction pins per side - Sealed Cro-Mo steel axle with 9/16" spindle

Rally RK200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes. - Advanced Cycling Dynamics—In addition to total power and cadence, Rally RK200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve. - Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power. - Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness. - Power Phase—Get a clear look at where you're producing power in the pedal stroke. - Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal. - Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite LOOK KEO cleats in mind. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 326g - Water resistance: IPX7 - Cleat type: KEO - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RK200 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

The ultimate pedal for enduro riding and racing, with a longer spindle. - Concave platform for secure foothold - 6 adjustable pins per side for grip - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for increased shoe clearance and control - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearing & double seal system

Crank Brothers' Candy 11 is the pedal to sate a racer's sweet tooth. This customizable pedal boasts integrated traction pad technology to refine fit, feel and power transfer, while titanium components shave weight. A ribbed body helps your foot grab the pedal body when you've unclipped, though the four-sided entry will have you engaged and off on the first try. Rely on chamfered edges to reduce rock-strikes, and a hex alloy end cap bash guard to help minimize damage to the pedal body.

- Scallop shape provides extra grip and a stable platform. - Low-profile design. - 10 replaceable and adjustable pins per side. - Giant original Laser-etched pattern. - Ball bearing. - Cro-Mo axle.

- Scallop shape provides extra grip and a stable platform. - Low-profile design. - 10 replaceable and adjustable pins per side. - Sealed bearings. - Cro-Mo axle.

- Lightweight, strong composite cage body. - CNC-machined chromoly steel axle. - LSL and Sealed bearings for smoother pedaling and durability. - Binding adjustable tension (80-180 kgf-cm).

- Maximized concave surface area (2mm) combined with a minimalist profile for secure, efficient pedaling action. - Durable magnesium alloy platform withstands the toughest impacts with minium weight. - Tough chromoly steel spindle for long lasting stability. - 10 replaceable and adjustable metal pins (per side) for maximum foot engagement and security. - Sealed cartridge bearing for smooth long-lasting performance.

- Forged alloy body and cage - Oversize oval design - Chromoly spindle - Toe clip compatible - 467g pair

Nylo-Comp Pedals feature a one-piece resin body, molded pin design, and chromoly spindle. - Loose ball bearings - 375g/pair

- Durable nylon+fiber body - Heat-treated chromoly spindle - Molded pins - Loose ball bearings - 375g/pair

At 110 x 105MM, Chromag's Scarab pedals feature one of the widest platforms available, yet thanks to the thin profile and chamfered corners, it has great clearance. Chromag's proprietary extrusion and machined design provides an ultra thin true-concave profile that is only 13mm at platform center. Custom traction pins are made of hardened steel and feature two height options via the removable washer. A shear line reduces pedal damage when the pins are struck. Each pedal features 42 placement options for the ultimate customization. • Low profile 13mm at platform center • True concave design • Custom adjustable height pin • 42 pin placement options • 430g / pair

- One-piece alloy body - Chromoly spindle - Toe clip compatible - Dual-sided design - 320g pair - 9/16-inch spindle

- Forged aluminum body - Chromoly spindle - Non-slip studs - Toe clip compatible - 529g per pair (9/16-inch)

- Chrome plated steel body and cage - Built in reflectors

- One piece alloy body with rubber surface for grip - Chromoly spindle - 574g pair (9/16")

- Reintroduction of the classic MKS design that set the standard for toe clip pedals - Aluminum body with serrated alloy cage for added grip - Sealed mechanism with cup/cone bearings

Crank Brothers Mallet DH, the choice of DH world champions. - Concave platform for secure foothold - 8 adjustable pins per side for grip - Traction pad technology customizable interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for stability at speed - 4-sided entry / superior mud shedding - Customizable float and release angle - Premium bearings and double seal system - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material cast: Stainless steel - Spring material 300 series stainless steel - Release angle 15° / 20° - Max rider weight no restriction - Q-factor 57mm - Inner bearing type IGUS LL-glide bearing - Outer bearing type enduro cartridge bearing - Cleat premium brass cleats with shims included - Adjustable pins 8 per side for grip - Endcap hex alloy - Weight: 479 grams

Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm. Dual-Concave Profile: - Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side. Extra Grip: - Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts. Shaped with Purpose: - The shape of Waveform Aluminum Pedals matches the footprint of your shoe Reliable Performance: - Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Tapered Edges: - Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain Two sizes: - Large: 112mm x 106mm - 384g - Small: 105mm x 99mm - 373g Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.

The Dak pedals are the Dakota Roche signature model that feature 14 large hexagon molded pins on both sides for maximum grip. - Slim profile - Large surface area - Heat treated 4130 spindle - 9/16"

An excellent choice for year round riding. Fyxation's robust impact-grade nylon body, sealed-bearing construction, and grippy metal pinned platform with full stainless steel pins. For the fat-biker or winter commuter, the durable stainless pins add an extra layer of rust protection for the harshest riding conditions. - High-impact nylon body built to take abuse - Smooth-running sealed bearing and DU bushing - Electroplated chromoly spindle - Electroplated stainless steel replaceable pins for added grip with shoes or boots - Nylon body doesn't suck heat out of your feet like alloy pedals do - Height: 14mm - Width: 105mm - 9/16"

- Super thin-profile platform pedal designed for freeride, BMX, and urban riders -Durable 6061 alloy construction with 20 replaceable traction pins (10 per side) - 13.3mm height/105mm width - CrMo spindle axle with a smooth running, sealed inner DU bushing/dual-outer sealed bearing system - Weight: 380g

VP's Flat Pedals combine wide platforms and a great grip for excellent stability with extruded and CNC-machined aluminum bodies for light weight and a rainbow of colors for high style. You also get tough chromoly axles and sealed bearings for durability. - 345 grams - 9/16" axles

- Lightweight alloy body with steel cage - Toe-clip compatible - 9/16-inch Cr-Mo axle

- Moulded grip pins - 10 pins per side - One-piece alloy body

- Pedal Weight (pair): 260g - Size: 102 X 96 X 11 mm - Body Material: magnesium extruded / CNC machined - Spindle: CNC machined, cr-moly - Pedal Bearings: thrust bearings / IGUS bushings - Pins: replaceable SAP (1/8" x 8mm) pins

- 90mm x 90mm Small Platform - Cro-Mo Axle - 6 rear loading, replaceable steel pins - Gripper profile for enhanced pedal traction - Fully sealed and lightweight DU bushing design - Pedal Weight: 310g